Products
Abrasives agglomerated in ceramics annealed in an oven with a controlled atmosphere whose most frequent applications are the high and medium trimming processes of alloys in zamack, brass, alpaca, stainless steel etc.
Properties:
Greater ease-of-use and low wastewater treatment cost. Great resistance to wear thus generating low production costs. Wear: from 0.2% to 2% in 24 hours of work, depending on qualities Different abrasiveness for any particular process and part type. Presented in geometrical shapes (cone, pyramid, ellipse, etc.) in order to be able to reach the corners of the different part types.
If you would like to obtain information or make a consultation or suggestion, we are at your disposal for answering your queries: coniex@coniex.com or if you prefer you can complete our contact form.
Properties:
Greater ease-of-use and low wastewater treatment cost. Great resistance to wear thus generating low production costs. Wear: from 0.2% to 2% in 24 hours of work, depending on qualities Different abrasiveness for any particular process and part type. Presented in geometrical shapes (cone, pyramid, ellipse, etc.) in order to be able to reach the corners of the different part types.
If you would like to obtain information or make a consultation or suggestion, we are at your disposal for answering your queries: coniex@coniex.com or if you prefer you can complete our contact form.
| Search keys: glass microspheres ceramic enamels corindon corindons moulds spin casting |
|
 |
|
|
 |
 |
|
 |
  |
|