Pewter molds

Our range of SILCODISC-PE molds, characterized by their high mechanical and tear resistance , guarantees a very long service life of the molds. They are specially designed and formulated for centrifugal casting of low melting point metal alloys, such as pewter and other tin alloys . They are also suitable for the centrifugal casting of RESINS.

Thanks to our own laboratories, we can manufacture custom molds on demand, to meet any need for the manufacture of parts.

Technical characteristics of the SILCODISC-PE range of molds

Extraordinary resistance to tearing.
Low viscosity before vulcanization (raw), which facilitates handling for mold making and part nailing, minimizing the “rebound” effect.
High flexibility, which allows the demolding of complicated parts.
High resistance to metal abrasion.

What type of mold to use?

The choice of the type of mold to be used depends on several factors: shape (geometry) of the part, weight/volume ratio of the part, size of the part which determines the mold diameter, flexibility required for demolding the part, etc.

Range of molds for pewter and other tin alloys

Also suitable for resins

INTENSE GREEN

Hardness 55 ShA
High mechanical resistance
High flexibility.
Small and medium-sized parts
Parts with high extraction difficulty.
Diameters from 230 to 500mm
Standard thickness from 8 to 14mm
Tin and resin alloys only

GREEN

Hardness 57 ShA
High mechanical resistance
High flexibility.
Small and medium-sized parts
Parts with high extraction difficulty.
Diameters from 230 to 500mm
Standard thickness from 8 to 14mm
Tin and resin alloys only

ROSA

Hardness 60 ShA
High mechanical resistance
Medium/high flexibility.
Small and medium-sized parts
Pieces with medium/high extraction difficulty.
Diameters from 230 to 500mm
Standard thickness from 8 to 14mm
Tin and resin alloys only

RED

Hardness 65 ShA
High mechanical resistance
Medium flexibility.
Medium and large parts
Parts with medium extraction difficulty
Diameters from 230 to 500mm
Standard thickness from 8 to 14mm
Tin and resin alloys only

All our products have Technical Data Sheet (TDS) and Material Safety Data Sheet (MSDS). Do not hesitate to ask for more information.

For optimum results in the manufacture of your PELTRE parts , we recommend the use of our PELTRE, an alloy specially designed for these molds. See our section PEWTER ALLOYS