Silicone tear
To avoid these breaks, the R&D&I laboratory of CONIEX, S.A. has developed a special silicone with high resistance to tearing.
Original vulcanized release agent
During the vulcanization of centrifugal casting molds, problems of adhesion of the original parts to the mold silicone can occur, especially with resin parts. At CONIEX we have the ideal product that will avoid adhesion problems that may occur, that the part may break or that part of the silicone from the mold may remain…
SEE YOU IN MADRIDJOYA 2020
We are back at MadridJoya with our distributor Fornituras Delarosa! You will find us from Thursday 6th to Sunday 9th February, from 10am to 7pm at stand 6F13. Once again, IFEMA organizes the reference event of the sector with the most innovative proposals for fine jewelry, costume jewelry and watches. In this edition of MadridJoya,…
Use of Teflon rods in centrifugal casting
Teflon is a material with excellent properties. It is non-stick, has low wettability and surface energy and does not generate friction.
Uses of industrial talc in centrifugal casting molds
During centrifugal casting the molds suffer due to the heat of the material. For this reason, the use of industrial talc is highly recommended.
Why should I use CONIEX industrial talc in my molds?
Why apply talc in casting molds? Due to the aggression suffered by the molds during casting due to different factors, one of the most important being the abrasion of the metal at high temperature, the rubber and silicone molds deteriorate until they reach the end of their productive life. It is therefore advisable to apply…
Bisphenol A: substance of “extreme concern”.
ESMALTEX: The CONIEX range without Bisphenol A From CONIEX we want to show our commitment to health and the environment, that is why our enamels (epoxy resins) are the only ones in the market 100% Bisphenol A free. After more than two years of testing and trials in our R&D laboratory, we were able to…
Enameling: problems and solutions (II)
In this post we bring you the second part of the list of the most common problems that can occur during glazing and their solutions. To go to the first part, click here . 6. ENAMEL BECOMES BRITTLE It is due to the fact that the mixture contains an excess of catalyst, when. Mixing with…
Enameling: problems and solutions (I)
ENAMELING: PROBLEMS AND SOLUTIONS The extensive experience of the Technical Team of CONIEX training and advising in enameling techniques has allowed us to elaborate a decalogue of the most common problems faced by our customers… In this first post we will talk about the problems when enameling parts in order to identify which are the…
Jewelry enameling
In recent times we appreciate in consumers a growing tendency to choose genuine products. We choose, more and more, to acquire articles made through unique processes, moving away from those manufactured in series and lacking in personality. In this sense, for several years in CONIEX we have observed how many of the new Spanish firms…